Inverter Turns Off When the Fridge Starts: Causes and Safe Fixes
If your inverter shuts down when the refrigerator compressor starts, the problem may be startup surge, battery weakness, overload, wiring loss or inverter sizing.
Generator Using Too Much Fuel: 9 Reasons and What to Check
High generator fuel consumption can come from heavy loads, poor maintenance, engine problems, low power factor or operating habits.
Inverter Fan Running All the Time: Is It Normal or a Warning?
An inverter cooling fan may run because of load, charging, heat or internal temperature. Learn when continuous fan operation is normal and when to investigate.
Fridge Keeps Clicking but Is Not Cooling: Common Causes
A refrigerator that clicks repeatedly but does not cool may be struggling to start its compressor or may have a control, voltage or sealed-system problem.
Freezer Compressor Is Hot but Not Cooling: What to Check
A hot freezer compressor with weak or no cooling can point to poor ventilation, relay problems, compressor trouble, airflow issues or a sealed-system fault.
Generator Voltage Too High or Too Low: What It Means and What to Do
Unstable generator voltage can damage appliances. Learn common causes of voltage that is too high, too low or constantly fluctuating.
Washing Machine Not Draining Water: Causes and Safe Fixes
If water remains in the drum after a wash, check the drain hose, filter, load balance, pump and programme before assuming the machine is badly damaged.
Air Conditioner Leaking Water Inside the Room: Common Causes
Indoor AC water leaks are commonly linked to a blocked drain, dirty filter, frozen coil, poor installation or drain-pan problem.
Washing Machine Shaking Violently During Spin: How to Reduce It
A violently shaking washer can come from an unbalanced load, poor levelling, transit bolts, weak suspension or floor movement.
AC Turns Off After a Few Minutes: 9 Possible Reasons
An air conditioner that starts and stops after only a few minutes may be short cycling because of settings, airflow, sensors, overheating or electrical faults.